FARM EQUIPMENT AUCTION

MIKE PITTMAN & OTHERS.

SATURDAY 13^TH MARCH – 2010 – 10:00 AM

HALIFAX, NC

 Directions:    3 ½ miles south of Halifax, NC on Hwy. 125.  8 miles north of Enfield on Hwy. 301. 12 miles north of Scotland Neck on Hwy. 125.

SALE SITE ADDRESS:  12100 NC HWY. 125 – Halifax, NC  27839

 TRACTORS, COMBINE, COTTON & PEANUT EQUIPEMNT & TRUCKS.

John Deere 7800, SN-10814, powered by 145 hp 6-cyl. diesel, power shift, cab, 540 & 1000 shift-on-the-go, (2) sets dual remote hydraulic outlets, 14L-16.1 front tires, (2) sets dual remote hydraulic outlets, 9054 hrs., very clean & nice.

John Deere 2955, SN-6-625810, powered by 86 hp, 6-cyl. diesel, standard transmission, set dual remote hydraulics, 2-post roll guard, 10.00-16 front tires, 16.9-398 rear tires.

John Deere 3020, SN-T113R-129240R, powered by 70 hp 4-cyl. diesel, synchro-range transmission, 1000 & 540 shift-on-the-go pto, 7.50-18 front tires, 15.5-38 rear tires on 14” rim, late model, side console hydraulics, only 2 owners in same neighborhood.

Ford TW5, powered by 105 hp 6-cyl. diesel, standard transmission, differential lock, 540 pto, (2) sets dual remote hydraulic outlets, cab, 11.00-16 front tires, 18.4-38 dual rear tires, 3082 hrs. believed to be accurate.

Case IH 7110, 4x4, SN-A1BAO15430, powered by 131 hp 6-cyl. diesel, power shift, 1000 & 540 shift-on-the-go pto, 13.6.28 front tires, 18.4R38 rear tires (new) 11,840 hrs.

John Deere 9500, SN-635505, 30.5-32 front tires, 149-24 rear tires, 3013 engine hrs., 2059 machine hrs.

John Deere 8820, PIN-46658, 30.5x32 front tires, 16.9-26 rear tires, 3820 machine hrs., straw spreader, front & rear drive planetary, new cleaning, tailing, & throat chains, ready for 12-row or a 30’ head.

John Deere 918, flex grain platform, SN-635708, new pickup fingers.

John Deere 444 corn head, 4-row, low tin back.

John Deere 222 flex head.

John Deere 9960, 4x4, 4-row cotton picker, SN-742, 3181 engine hrs.

John Deere 9960 4-row cotton picker, SN-4618, 4948 engine hrs, 2152 machine hrs,.

John Deere 9930 2-row cotton picker, 6-cyl. diesel engine, SN-6079 (for parts, running when set down).

Long 2070 cotton boll buggy, single axle, 11-22.5 tires.

Gregory 5000 Express, 2-row peanut combine, 1000 pto.

KMC 4-row peanut combine, 1000 pto.

KMC (late model) 4-row peanut digger, 1000 pto, good. (has factory late model new style points up front).

United Farm Tools 4-row digger, 1000 pto.

Ferguson 6-row hydraulic fold fluffer (minus one side).

(6) Roanoke single axle peanut trailers.

’79 Ford L9000 w/290 Cummins , 9-speed, Wet Line, Hendrickson suspension, sliding 5^th wheel.

’74 Chevrolet C65, 366 V8 gas, 5-speed w/2-speed, ps, 18’ steel flat bed w/twin cylinder dump, 3 ½’ grain sides, 67K miles, good truck.

TILLAGE & PLANTING EQUIPMENT.

International 475, 20’, 52-blade hydraulic fold disc, 9” spacing front & rear, tandem wheels, trail-type.

Unverferth 14’ field cultivator w/drag board, single rolling basket minus shanks.

KMC 8-row hydraulic fold Danish tine cultivator.

Case 3-bottom plow, 3-pt.

Harrell 2805 4-bottom swing plow, in furrow, 3-pt.

(2) KMC roto-tillers, 1000 pto, (1) 12’, (1) 14’.

John Deere 7300 8-row vacuum planter, stack fold, no-till, quick fill insecticide, set on 36” rows.

John Deere 7300 5-row vacuum planter w/KMC no till ripper & lift assist, 30”.

KMC 8-row strip till, hydraulic stack fold, hydraulic row markers, single baskets, set on 36”.

John Deere 7000 4-row no till planter w/granular fertilizer attachment, leveling board, dual depth control wheels, hyd. row markers, set on 36” row, pull type (needs a little attention before going to field).

International 900, 4-row planter, set on 36”.

Cole 1800,4-row planter w/insecticide boxes, disc openers, 36” spacing, 3-pt.

KMC 4-row ripper/bedder, floating linkage, dirt door, hydraulic row markers, 14’ tool bar, set on 36”.

4-row bed conditioner, bed knockers, rolling spiders, 3-pt.

Case IH model 125 4-bottom flip plow, 16".

 EQUIPMENT.

John Deere 1418 rotary cutter, 1000 pto, 3-pt., good.

Bush Hog 12012 rotary cutter, 12’, 1000 pto, w/stump jumper, 3-pt.

Bush Hog SM-60 ditch bank cutter, 5’ deck, 1000 pto, hydraulic slide, runs off tractor remotes, like new.

Bush Hog 120-09 hydraulic blade, 9’, 3-pt., nice.

Land Pride 10’ all hydraulic blade, 3-pt.

John Deere 146 loader, w/6’ bucket, w/brackets, independent hydraulic control levers, rear axle struts, last mounted on JD 3020.

Dunham Lehr front end loader, 5’ bucket.

Speedy Spread 506-S stainless steel spreader, 17” chain, 540 hydraulic pump, tandem axle, dual spinner.

(2) 8-row hydraulic fold nitrogen applicators, 200 gal. poly tank, 27’ x7x7 bar, gauge wheels, (1) has John Blue ground driven  pump.

1000 gal. poly nurse tank on tandem axle trailer, 14.5 tires, pin hitch.

1000 gal. poly nurse tank mounted on 4-wheel wagon, tie rod steer, w/pump & motor.

1000 gal. black poly oval nurse tank in cradle.

Reddick 300 gal. sprayer, hydraulic fold booms, 50’ booms, 3-pt.

Red Ball 8-row hooded sprayer.

Long 1553 irrigation reel, 860’ 3” hose, Nelson 150 big gun w/gas engine rewind, on single axle carrier, on turn table.

Several sets poly saddle tanks, some fit JD 8000 series.

18.4-38 snap on duals, last on 9960.

18.4-38 snap on duals, last on 9500, bell shape spacer.

John Deere 8-row row markers.

Jeffers quick hitch, 3-pt.

(12) Case IH suitcase weights.

Grain auger 5" by 36' pto driven

Peanut dryer fans, Aerovent twin stacked 36', 7.5 hp motors, single phase.

Off Site Sale:  12435 Hwy. 125 – Halifax, NC  27839.

8000 gal. horizontal fuel tank, above ground, w/service station style electric fuel pump, last used for diesel,  presently mounted on bed of gravel.  View prior to sale. From sale site take left out of drive on Hwy. 125, travel ½ mi., tank located behind shop building.  Watch for flagging on mail box on turn.

Auctioneer’s Note:  Mike is having a dispersal of his cotton & 8-row equipment.  Come early & inspect the equipment.  Be sure to bring your trailer sale day – all items need to be loaded sale day.